Adding the stabilizer fins
07 Feb
In building the stabilizer fins for the steampunk diarama airship, I first had to choose a shape. On other ships, I’ve made them rounded, but I like the feeling of a scalloped fin. I’ve also made different scalloped fins before, with some being a solid fin with ribs and others having a support structure, to which was attached actual cloth sailcloth. For this small zeppelin, I decided on the former for its ease at this relatively small scale. This decided shape I then cut out of an index card stock I had lying around. To give them age and interest, I sponged them with a light brown watercolor (not pictured, sorry!)
Index stock fins cut out
I then had to make the ribs, and to make it simple, yet appealing, I decided to cut these out of a similar stock, but in this case, since they would be painted anyway, I decided to use cereal box cardboard and then paint them to contrast and have interest. Remember, I throw nothing away that may have a raw materials use when reused, repurposed or recycled!
Fin ribs cut from cereal box cardboard
I painted them by spraying a basic green enamel. I did this because a water-based paint would have been repelled by the coating on the cereal box. I then antiqued a patina on with a lighter water-based green acrylic, then applied to the fins.
Finished fins
After finishing the fins, I glued them at top and lower angled positions to the airship body with standard white glue and let them dry. To add another element of interest, I used dimensional paint to “dot” copper rivets on the fin ribs. I forgot to mention that I had done this to the propeller scaffolding as well. (How many of you noticed that?) So here’s the finished attachment…
Attached fins
Next time, I’ll show the process of building the gondola. It’ll be fun too, because it isn’t your run-of-the-mill boat shape!
Stay tuned…in fact, tell all your ‘punk friends to subscribe!