Propeller process

07 Mar

I get asked all the time how I made a particular part on one of my steampunk airships. I’m also told that I should do DIY pictures and videos, and truthfully, I do take progress photos when I’m working on an airship. I do this because I have always thought that someday I’d do some sort of steampunk DIY book or something.

With that said, I thought I’d post a few photos showing how I did a particular propeller for a particular airship. Of course, this is only one example, because I’ve done dozens and dozens of different propellers in many different ways.

This one is made using a scotch tape core and 8 of those little plastic tasting spoons…you know, the ones they have in samples passed out in grocery stores. So they started like this…

Photo of repurposed pieces to be used in making a steampunk airship propeller.

Then I cut slits in the outer ring of the tape core and glued the ends of the spoons into them. You’ll also notice that I cut a thin cardboard ring that was glued to the top side of the tape core for a smooth look. For plastics, I either use super glue or E6000, depending on how the pieces go together and what stresses they may be subject to. Super glue is great for “matching fits” and the E6000 is a gel-like glue that can fill small spaces and it a bit more flexible, so it was what used in this case. As with all volatile glues, don’t breathe the fumes. Use in a ventilated area or wear an approved respirator!

Photo of repurposed pieces glued together, making a steampunk airship propeller.

After all the glue dried, I then spray with a copper spray paint for the metal look I wanted. I use a couple different ones depending on the desired finish. In this case, I used Rustoleum’s Hammered series in copper color.

Photo of copper painted propeller made of repurposed materials to be used on a steampunk airship.

Finally, I used a couple different green acrylic paints to add a patina or corrosion look to the propeller. Some people like the shiny copper look, but I’ve always been partial to the patina look and think it adds realism and character to the piece.

Photo of copper painted and patinaed propeller made of repurposed materials to be used on a steampunk airship.

So this is what you wind up with after adding the patina. See how it looks rusty and aged? This is why I like it so much. After the patina, I’ll add accents like copper rivets, (just blobs of paint), which adds contrast and interest and even a bit more realism.

What techniques do you like to use? Send me comments and photos and I’ll be happy to show what some of you are doing!

Stephan J. Smith is the artist and sculptor at Artsmith Craftworks in Swartz Creek, MI. Using recycled and re-purposed materials, Stephan builds a myriad of sculpted wonders, including fantastic and whimsical steampunk airships that have amazed and delighted fans for years. A passion for reusing and up-cycling found items into beautiful and amazing art is what drives Stephan to make art that both teaches and inspires. Stephan also does commissioned work and is available to do talks and classes on re-purposing/up-cycling and may be reached at ArtSmithCraft@yahoo.com or at 810-516-7381.

Leave a comment

Your email address will not be published. Required fields are marked *